View LCD1602A_398762.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Crystalfontz America, Inc. 15611 East Washington Road
Valleyford, WA 99036
Phone: (509) 291-3514 Fax: (509) 291-3345
http://www.crystalfontz.com email: sales@crystalfontz.com
Crystalfontz America, Inc.
CUSTOMER MODEL APPROVAL CFAH1602A-AGB-JP BY: DATA:
SALES BY
APPROVED BY
CHECKED BY
PREPARED BY
Crystalfontz America, Inc.
w
w
w
.d
ee sh ta a
u. t4
om c
15611 East Washington Road Valleyford, WA 99036-9747 Phone: (509) 291-3514 Fax: (509) 291-3345 e-mail: sales@crystalfontz.com http://www.crystalfontz.com
www..com
Crystalfontz America, Inc. 15611 East Washington Road
Valleyford, WA 99036
Phone: (509) 291-3514 Fax: (509) 291-3345
http://www.crystalfontz.com email: sales@crystalfontz.com
&RQWHQWV
1.Module Classification Information 2.Precautions in use of LCD Modules 3.General Specification 4.Absolute Maximum Ratings 5.Electrical Characteristics 6.Optical Characteristics 7.Interface Pin Function 8.Contour Drawing & Block Diagram 9.Function Description 10.Character Generator ROM Pattern 11.Instruction Table 12.Timing Characteristics 13.Initializing of LCM 14.Quality Assurance 15.Reliability 16.Backlight Information
Crystalfontz America, Inc. 15611 East Washington Road
Valleyford, WA 99036
Phone: (509) 291-3514 Fax: (509) 291-3345
http://www.crystalfontz.com email: sales@crystalfontz.com
0RGXOH&ODVVLILFDWLRQ,QIRUPDWLRQ
CFA H 1 6 0 2
c Brand: CRYSTALFONTZ AMERICA, INCORPORATED d Display Type: H(Character Type, G(Graphic Type e Display's logical dimensions: 16 columns by 02 lines f Model serials no. g Backlight Type: N(Without backlight h LCD Mode: i LCD Polarizer Type,
Temperature range, Viewing direction:
cd
e
AA G B
f ghi
JP
j
j Special Code:
B(EL, Blue green D(EL, Green W(EL, White F(CCFL, White B(TN Positive, Gray N(TN Negative, G(STN Positive, Gray Y(STN Positive, Yellow Green A(Reflective, N.T, 6:00 H(Transflective, W.T,6:00 D(Reflective, N.T, 12:00 K(Transflective, W.T,12:00 C(Transmissive, N.T,6:00 G(Reflective, W. T, 6:00 J(Reflective, W. T, 12:00 F(Transmissive, N.T,12:00 B(Transflective, N.T,6:00 I(Transmissive, W. T, 6:00 E(Transflective, N.T.12:00 L(Transmissive, W.T,12:00 JP(English and Japanese standard font
Y(LED, Yellow Green A(LED, Amber R(LED, Red O(LED, Orange G(LED, Green M(STN Negative, Blue F(FSTN Positive T(FSTN Negative
Crystalfontz America, Inc. 15611 East Washington Road
Valleyford, WA 99036
Phone: (509) 291-3514 Fax: (509) 291-3345
http://www.crystalfontz.com email: sales@crystalfontz.com
3UHFDXWLRQVLQXVHRI/&'0RGXOHV
(1)Avoid applying excessive shocks to the module or making any alterations or modifications to it. (2)Don't make extra holes on the printed circuit board, modify its shape or change the components of LCD module. (3)Don't disassemble the LCM. (4)Don't operate it above the absolute maximum rating. (5)Don't drop, bend or twist LCM. (6)Soldering: only to the I/O terminals. (7)Storage: please storage in anti-static electricity container and clean environment.
*HQHUDO6SHFLILFDWLRQ
Item Number of Characters Module dimension View area Active area Dot size Dot pitch Character size Character pitch LCD type Duty View direction Backlight Type Dimension 16 characters x 2 Lines 84.0 x 44.0 x 13.5(MAX) 66.0 x 17.0 56.20 x 11.5 0.55 x 0.65 0.60 x 0.70 2.95 x 5.55 3.55 x 5.95 STN, Positive, Transflective, Gray 1/16 6 o'clock LED Amber Unit
mm mm mm mm mm mm mm
Crystalfontz America, Inc. 15611 East Washington Road
Valleyford, WA 99036
Phone: (509) 291-3514 Fax: (509) 291-3345
http://www.crystalfontz.com email: sales@crystalfontz.com
$EVROXWH0D[LPXP5DWLQJV
Item Operating Temperature Storage Temperature Input Voltage Supply Voltage For Logic Supply Voltage For LCD Symbol TOP TST VI VDD-VSS VDD-V0 Min 0 -10 VSS -0.3 -0.3 Typ

Max +50 +60 VDD 7 13
Unit
: :
V V V
(OHFWULFDO&KDUDFWHULVWLFV
Item Supply Voltage For Logic Symbol VDD-VSS Condition
Min 4.5
Typ
Ta=0: Supply Voltage For LCD VDD-V0 Ta=25: Ta=50: Input High Volt. Input Low Volt. Output High Volt. Output Low Volt. Supply Current VIH VIL VOH VOL IDD

Max 5.5 4.2
Unit V V V V V V V V mA
3.8

3.6 2.2
2.4
VDD=5V

VDD 0.6
0.4
1.2
Crystalfontz America, Inc. 15611 East Washington Road
Valleyford, WA 99036
Phone: (509) 291-3514 Fax: (509) 291-3345
http://www.crystalfontz.com email: sales@crystalfontz.com
2SWLFDO&KDUDFWHULVWLFV
Item View Angle (H)y Contrast Ratio Response Time T fall CR T rise CR
2 -30 Symbol (V) Condition CR
2 Min 10 Typ

3
Max 105 30
Unit deg deg
200 200
ms ms
150 150
Definition of Operation Voltage (Vop)
Definition of Response Time ( Tr , Tf )
Non-selected Conition Intensity 10& Non-selected Conition
Intensity 100&
Selected Wave Non-selected Wave
Selected Conition
Cr Max Cr = Lon / Loff
100& 90&
Vop
Driving Voltage(V)
Tr
Tf
[positive type]
[positive type]
Conditions : Operating Voltage : Vop Frame Frequency : 64 HZ Viewing Angle(^y) : 0H^ 0H Driving Waveform : 1/N duty , 1/a bias
Definition of viewing angle(CR
2)
f l y= 270H y= 0H
b
y= 180H r y= 90H
Crystalfontz America, Inc. 15611 East Washington Road
Valleyford, WA 99036
Phone: (509) 291-3514 Fax: (509) 291-3345
http://www.crystalfontz.com email: sales@crystalfontz.com
,QWHUIDFH3LQ)XQFWLRQ
Pin No. Symbol 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 VSS VDD VO RS R/W E DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 A K Level 0V 5.0V Ground Supply Voltage for logic Description
(Variable) Operating voltage for LCD H/L H/L H,H(L H/L H/L H/L H/L H/L H/L H/L H/L H: DATA, L: Instruction code H: Read(MPU(Module) L: Write(MPU(Module) Chip enable signal Data bit 0 Data bit 1 Data bit 2 Data bit 3 Data bit 4 Data bit 5 Data bit 6 Data bit 7 LED + LED

Crystalfontz America, Inc. 15611 East Washington Road
Valleyford, WA 99036
Phone: (509) 291-3514 Fax: (509) 291-3345
http://www.crystalfontz.com email: sales@crystalfontz.com
&RQWRXU'UDZLQJ%ORFN'LDJUDP
84.0 0.5 71.2 66.0(VA) 56.2(AA) 2.5
6.4
11.9 14.65 4.0
9.0 13.9 2.5
1.5 2-R1.25 2-R2.5
H1 max H2
A
K
14
16- 1.0 PTH 1.8
1 16 15
6- 1.0 PTH 6- 2.0 PAD 1.6
10.2 4.0
P2.54*15=38.1 76.0
2- 2.5 PTH 2- 5.0 PAD
LED-H/L B/L High Low H1 13.5 H2 8.9 12.1 7.5
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Vss Vdd Vo RS R/W E DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 A/Vee K
7.3
44.0 0.5 26.2 17.0(VA) 11.5(AA)
2.5
3.55 2.95 0.6 0.55
7.0 15.0
0.6
36.0
16.9 12.9 20.4
0.4
5.95 5.55 0.7 0.65
The non-specified tolerance of dimension is
0.3mm.
DOT SIZE
MPU
80 series or 68 series
RS R/W E DB0~DB7
Com1~16
Controller/Com Driver HD44780 or Equivalent
16X2 LCD
Seg1~40 Seg41~80
LED B/L Drive Method
Drive from pin15, pin16
Bias and Power Circuit
R Seg Driver
R
VR 10K~20K
Vdd Vo Vss
A B/L K
D M CL1 CL2 Vdd,Vss,V1~V5
LCM
(Will never get Vee output from pi
Vee External contrast adjustment.
Optional
Character located DDRAM address DDRAM address
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F
N.V. Generator
Crystalfontz America, Inc. 15611 East Washington Road
Valleyford, WA 99036
Phone: (509) 291-3514 Fax: (509) 291-3345
http://www.crystalfontz.com email: sales@crystalfontz.com
)XQFWLRQ'HVFULSWLRQ
The LCD display Module is built in a LSI controller, the controller has two 8-bit registers, an instruction register (IR) and a data register (DR). The IR stores instruction codes, such as display clear and cursor shift, and address information for display data RAM (DDRAM) and character generator (CGRAM). The IR can only be written from the MPU. The DR temporarily stores data to be written or read from DDRAM or CGRAM. When address information is written into the IR, then data is stored into the DR from DDRAM or CGRAM. By the register selector (RS) signal, these two registers can be selected. RS 0 0 1 1 R/W 0 1 0 1 Operation IR write as an internal operation (display clear, etc.) Read busy flag (DB7) and address counter (DB0 to DB7) Write data to DDRAM or CGRAM (DR to DDRAM or CGRAM) Read data from DDRAM or CGRAM (DDRAM or CGRAM to DR)
Busy Flag (BF) When the busy flag is 1, the controller LSI is in the internal operation mode, and the next instruction will not be accepted. When RS=0 and R/W=1, the busy flag is output to DB7. The next instruction must be written after ensuring that the busy flag is 0. Address Counter (AC) The address counter (AC) assigns addresses to both DDRAM and CGRAM
Crystalfontz America, Inc. 15611 East Washington Road
Valleyford, WA 99036
Phone: (509) 291-3514 Fax: (509) 291-3345
http://www.crystalfontz.com email: sales@crystalfontz.com
Display Data RAM (DDRAM) This DDRAM is used to store the display data represented in 8-bit character codes. Its extended capacity is 808 bits or 80 characters. Below figure is the relationships between DDRAM addresses and positions on the liquid crystal display. High bits Low bits Example: DDRAM addresses 4E AC (hexadecimal) AC6 AC5 AC4 AC3 AC2 AC1 AC0 1 0 0 1 1 1 0
Display position DDRAM address 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F 2-Line by 16-Character Display
Character Generator ROM (CGROM) The CGROM generate 58 dot or 510 dot character patterns from 8-bit character codes. See Table 2. Character Generator RAM (CGRAM) In CGRAM, the user can rewrite character by program. For 58 dots, eight character patterns can be written, and for 510 dots, four character patterns can be written. Write into DDRAM the character code at the addresses shown as the left column of table 1. To show the character patterns stored in CGRAM.
Crystalfontz America, Inc. 15611 East Washington Road
Valleyford, WA 99036
Phone: (509) 291-3514 Fax: (509) 291-3345
http://www.crystalfontz.com email: sales@crystalfontz.com
Relationship between CGRAM Addresses, Character Codes (DDRAM) and Character patterns Table 1.
F o r 5 * 8 d o t c h a r a c t e r p a t te r n s C h a ra c te r C o d e s ( D D R A M d a ta ) 7 6 5 4 3 2 1 0 C G R A M A dd ress 5 H ig h 4 3 2 1 0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 C h a ra c te r P a tte rn s ( C G R A M d a ta ) 7 * * * * * * * * * * * * * * * * * 6 5 43 2 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 C h a ra c te r p a tt e r n ( 2 ) C h a ra c te r p a tt e r n ( 1 )
H ig h
Low
0
0
0
0
*0
0
0
0
0
0
0
*0
0
1
Low 00 00 01 01 00010 10 11 11 00 00 01 01 00 1 10 10 11 11 00 00 1 1 1 1 1 1 1 0 0 1 1
H ig h ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** **
Low
0 0 0 0 0 0
C u r s o r p a t te r n
0
C u r s o r p a t te r n
0
0
0
0
*
1
1
1
*
*
*
F o r 5 * 1 0 d o t c h a ra c te r p a tte rn s C h a ra c te r C o d e s ( D D R A M d a ta ) 7 6 5 4 3 2 1 0 C G R A M A dd ress 5 H ig h 0 0 0 0 0 0 0 0 1 1 1 1 4 3 2 0 0 0 0 1 1 1 1 0 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 0 1 0 1 0 1 0 1 0 1 C h a ra c te r P a tte rn s ( C G R A M d a ta ) 7 * * * * * * * * * * * * 6 * * * * * * * * * * * * 5 4 3 0 0 0 0 0 0 0 0 0 * 2 Low 0 0 0 0 0 0 0 0 0 * 0 0 0 0 0 0 0 0 0 * 0 0 0 0 0 * C h a ra c te r p a tt e r n 0 0 0 1 0
H ig h
Low
Low
H ig h *0 *0 * * * * * * * * *0 * *
0
0
0
0
*0
0
0
0
0
C u r s o r p a t te r n
: " H ig h "
Crystalfontz America, Inc. 15611 East Washington Road
Valleyford, WA 99036
Phone: (509) 291-3514 Fax: (509) 291-3345
http://www.crystalfontz.com email: sales@crystalfontz.com
&KDUDFWHU*HQHUDWRU5203DWWHUQ
Table.2
Upper 4 bit Lower 4 bit
LLLL LLLH LLHL LLHH LHLL LHLH LHHL LHHH HLLL HLLH HLHL HLHH HHLL HHLH HHHL HHHH
CG RAM (1)
LLLL
LLLH
(2)
LLHL
(3)
LLHH
(4)
LHLL
(5)
LHLH
(6)
LHHL
(7)
LHHH
(8)
HLLL
(1)
HLLH
(2)
HLHL
(3)
HLHH
(4)
HHLL
(5)
HHLH
(6)
HHHL
(7)
HHHH
(8)
Crystalfontz America, Inc. 15611 East Washington Road
Valleyford, WA 99036
Phone: (509) 291-3514 Fax: (509) 291-3345
http://www.crystalfontz.com email: sales@crystalfontz.com
,QVWUXFWLRQ7DEOH
Instruction Code Instruction RS
R/W
Description DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0
Execution time (fosc=270Khz)
Clear Display
0
0
0
0
0
0
0
0
0
Write "00H" to DDRAM and set 1 DDRAM address to "00H" from AC
1.53ms
Return Home
0
0
0
0
0
0
0
0
1
Set DDRAM address to "00H" from AC and return cursor to its original position if shifted. The contents of DDRAM are not changed.
1.53ms
Entry Mode Set
0
0
0
0
0
0
0
1
Assign cursor moving direction I/D SH and enable the shift of entire display. Set display (D), cursor (C ), and B blinking of cursor (B) on/off control bit. Set cursor moving and display shift control bit, and the direction, without changing of DDRAM data. Set interface data length (DL:8-bit/4-bit), numbers of display line (N:2-line/1-line)and, display font type (F:511 dots/5 dots)
39os
Display ON/OFF Control
0
0
0
0
0
0
1
D
C
39os
Cursor or Display Shift
0
0
0
0
0
1
S/C R/L

39os
Function Set
0
0
0
0
1
DL
N
F
39os
8
Set CGRAM Address Set DDRAM Address Read Busy Flag and Address
0 0
0 0
0 1
1 AC5 AC4 AC3 AC2 AC1 AC0 AC6 AC5 AC4 AC3 AC2 AC1 AC0
Set CGRAM address in address counter.
39os 39os
0
1
Set DDRAM address in address counter. Whether during internal operation or not can be known by reading BF AC6 AC5 AC4 AC3 AC2 AC1 AC0 BF. The contents of address counter can also be read. D7 D6 D5 D4 D3 D2 D1 D0 Write data into internal RAM (DDRAM/CGRAM).
0os
Write Data to RAM
1
0
43os
Read Data from RAM
1
1
D7 D6 D5 D4 D3 D2 D1 D0
Read data from internal RAM (DDRAM/CGRAM).
43os
a ""don't care
Crystalfontz America, Inc. 15611 East Washington Road
Valleyford, WA 99036
Phone: (509) 291-3514 Fax: (509) 291-3345
http://www.crystalfontz.com email: sales@crystalfontz.com
7LPLQJ&KDUDFWHULVWLFV
12.1 Write Operation RS R/W E
tr VIH1 VIL1 tsu1 VIL1 tw VIH1 VIL1 VIH1 VIL1 VIH1 VIL1 tsu2 Valid Data tc th1 tf VIL1 th2 VIH1 VIL1
th1 VIL1
DB0~DB7
(VDD=4.5V~5.5V , Ta=-30~+85:* Mode Characteristic E cycle Time E Rise/Fall Time E Pulse Width (High, Low) Write Mode R/W and RS Setup Time R/W and RS Hold Time Data Setup Time Data Hold Time tsu1 tH1 tsu2 tH2 40 10 80 10 Symbol tc tR, tF tw Min. 500 Typ.
230

Max.

20
Unit

ns
Crystalfontz America, Inc. 15611 East Washington Road
Valleyford, WA 99036
Phone: (509) 291-3514 Fax: (509) 291-3345
http://www.crystalfontz.com email: sales@crystalfontz.com
12.2 Read Operation
RS R/W E
VIH1 VIL1 tsu VIH1 tw VIH1 VIL1 tr tD VIH1 VIL1 Valid Data tc VIH1 VIL1
th VIH1 th tf VIL1 tDH VOH1 VOL1
DB0~DB7
(VDD=4.5V~5.5V , Ta=-30~+85:* Mode Characteristic E cycle Time E Rise/Fall Time E Pulse Width (High, Low) Read Mode R/W and RS Setup Time R/W and RS Hold Time Data Output Delay Time Data Hold Time tsu tH tD tDH 40 Symbol tc tR, tF tw Min. 500 Typ.
230

Max.

20
Unit
5
10

120
ns
Crystalfontz America, Inc. 15611 East Washington Road
Valleyford, WA 99036
Phone: (509) 291-3514 Fax: (509) 291-3345
http://www.crystalfontz.com email: sales@crystalfontz.com
,QLWLDOL]LQJRI/&0
Power on
Wait for more than 15 ms after V CC rises to 4.5 V
BF can not be checked before this instruction.
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Function set ( Interface is 8 bits long. ) 0 0 0 0 1 1 * * * *
Wait for more than 4.1 ms
BF can not be checked before this instruction.
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Function set ( Interface is 8 bits long. ) 0 0 1 * * * * 0 0 1
Wait for more than 100 s
BF can not be checked before this instruction.
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 Function set ( Interface is 8 bits long. ) 0 0 1 * * * * 0 0 1
BF can be checked after the following instructions. W hen BF is not checked , the waiting time between instructions is longer than execution instruction time.
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 0 0 1 N F * * 0 0 1 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 S I/D
Function set ( Interface is 8 bits long. Specify the number of display lines and font. ) The number of display lines and character font can not be changed after this point. Display off Display clear Entry mode set
Initialization ends
8-Bit Ineterface
Crystalfontz America, Inc. 15611 East Washington Road
Valleyford, WA 99036
Phone: (509) 291-3514 Fax: (509) 291-3345
http://www.crystalfontz.com email: sales@crystalfontz.com
Power on
Wait for more than 15 ms after VCC rises to 4.5 V
BF can not be checked before this instruction.
RS R/W DB7 DB6 DB5 DB4 0 0 0 0 1 1
Function set ( Interface is 8 bits long. )
Wait for more than 4.1 ms
BF can not be checked before this instruction.
RS R/W DB7 DB6 DB5 DB4 0 0 0 1 1 0
Function set ( Interface is 8 bits long. )
Wait for more than 100 s
BF can not be checked before this instruction.
RS R/W DB7 DB6 DB5 DB4 0 0 0 0 1 1
Function set ( Interface is 8 bits long. )
RS R/W DB7 DB6 DB5 DB4 0 0 1 0 0 0 0 0 0 0 1 0 0 0 N F * * 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 I/D S
BF can be checked after the following instructions. When BF is not checked , the waiting time between instructions is longer than execution instruction time. Function set ( Set interface to be 4 bits long. ) Interface is 8 bits in length. Function set ( Interface is 4 bits long. Specify the number of display lines and character font. ) The number of display lines and character font can not be changed after this point. Display off Display clear Entry mode set
Initialization ends
4-Bit Ineterface
Crystalfontz America, Inc. 15611 East Washington Road
Valleyford, WA 99036
Phone: (509) 291-3514 Fax: (509) 291-3345
http://www.crystalfontz.com email: sales@crystalfontz.com
4XDOLW\$VVXUDQFH
Screen Cosmetic Criteria
Item Defect Judgment Criterion A)Clear Acceptable Qty in active area Size: d mm Disregard d 0.10.1
1
Spots
Minor
0.2
2
Bubbles in Polarize
Minor
3 4
Scratch Allowable Density
Minor Minor
5
Coloration
Minor
Crystalfontz America, Inc. 15611 East Washington Road
Valleyford, WA 99036
Phone: (509) 291-3514 Fax: (509) 291-3345
http://www.crystalfontz.com email: sales@crystalfontz.com
5HOLDELOLW\
Content of Reliability Test
Environmental Test Test Item High Temperature storage Low Temperature storage High Temperature Operation Low Temperature Operation High Temperature/ Humidity Storage High Temperature/ Humidity Operation Content of Test Endurance test applying the high storage temperature for a long time. Endurance test applying the high storage temperature for a long time. Test Condition 60: 200hrs -10: 200hrs Applicable Standard ----
----
Endurance test applying the electric stress 50: (Voltage & Current) and the thermal stress 200hrs to the element for a long time. Endurance test applying the electric stress under low temperature for a long time. 0: 200hrs
----
----
Endurance test applying the high 60:,90%RH temperature and high humidity storage for a 96hrs long time. Endurance test applying the electric stress (Voltage & Current) and temperature / humidity stress to the element for a long time. Endurance test applying the low and high temperature cycle. -10: 25: 60: 30min 5min 1 cycle 30min Mechanical Test 50:,90%RH 96hrs
----
----
Temperature Cycle
-10:/60: 10 cycles
----
Vibration test
Endurance test applying the vibration during transportation and using. Constructional and mechanical endurance test applying the shock during transportation. Endurance test applying the atmospheric pressure during transportation by air. Others
Shock test Atmospheric pressure test
10~22Hz(1.5mmp-p 22~500Hz(1.5G Total 0.5hrs 50G Half sign wave 11 msedc 3 times of each direction 115mbar 40hrs
----
----
----
VS=800V,RS=1.5ke Static electricity Endurance test applying the electric stress to CS=100pF test the terminal. 1 time
----
***Supply voltage for logic system=5V. Supply voltage for LCD system =Operating voltage at 25:
Crystalfontz America, Inc. 15611 East Washington Road
Valleyford, WA 99036
Phone: (509) 291-3514 Fax: (509) 291-3345
http://www.crystalfontz.com email: sales@crystalfontz.com
%DFNOLJKW,QIRUPDWLRQ
Specification
PARAMETER Supply Current Supply Voltage Reverse Voltage Luminous Intensity Wave Length Life Time Color SYMBOL MIN ILED V VR IV
g
10
TYP 130 4.2
MAX 260 4.6 8
UNIT mA V V
TEST CONDITION V=4.2V

op
Amber
610 100000

CD/M2 ILED=130mA nm Hr. ILED=130mA V4.6V

▲Up To Search▲

Price & Availability of LCD1602A

	To Download LCD1602A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .